Monarques Gold Corporation (“Monarques”, “Monarques Gold” or the “Corporation”) (TSXV:MQR) (OTCMKTS:MRQRF) (FRANKFURT:MR7) is pleased to report additional assay results from the 2018 diamond drilling program at its wholly owned Croinor Gold project 50 kilometres east of Val-d’Or, Québec. The 20,000-metre program started in March 2018 and is focused on the expansion and infilling of the Croinor Gold deposit. The Phase 2 results are from a total of 5,327 metres of drilling in 27 holes (see plan view). Phase 2 drilling is complete, with assays pending, and Phase 3 drilling has started.
The Croinor Gold deposit is hosted in a sheared diorite sill three kilometres long by 60–120 metres wide, striking 295 degrees north and dipping 50–65 degrees to the north. The mineralization is associated with pyrite found within and adjacent to quartz-tourmaline veins. The goal of Phase 2 was to extend the Croinor Gold deposit farther west and infill the two areas slated for underground bulk sampling.
Hole CR-18-606 returned 8.24 g/t Au over 9.0 metres, including 26.38 g/t Au over 2.6 metres. This intersection lies 328 vertical metres below surface, 54 metres north of and 34 metres below the mineralized intersection of hole CN-88-133, which was used to design the deepest stope in the mining plan. Hole CR-18-601, drilled on the western part of the Croinor Gold deposit, 84 metres west of the nearest hole (CR-11-401) on the same horizon, returned 5.30 g/t Au over 1.1 metres in an intersection 336 metres below surface. These results show that the deposit is still open both at depth and to the west, and that further drilling is warranted.
Hole CR-18-610 returned 5.67 g/t Au over 7.0 metres just below the 500-foot level drift of the old mine, enlarging a planned stope on this level.
Infill drilling of two areas slated for bulk sampling returned 18.45 g/t Au over 0.9 metres, 12.00 g/t Au over 1.2 metres and 11.25 g/t Au over 1.0 metres from the area on the 125-foot level and 12.50 g/t Au over 1.1 metres, 6.34 g/t Au over 1.2 metres and 4.68 g/t Au over 1.2 metres from the area on the 250-foot level, in addition to other values shown in the table below. These encouraging numbers confirm and expand the two areas planned for bulk sampling on two different levels. The area on the 125-foot level is in the western part of the deposit and the area on the 250-foot level is near the old shaft in the middle of the deposit.
“Drilling on Croinor Gold continues to generate excellent results,” said Jean-Marc Lacoste, President and Chief Executive Officer of Monarques. “Like Phase 1, Phase 2 was a success, striking mineralized zones in 26 of the 27 holes, returning a number of high-grade intersections and enabling us to confirm the grades and continuity of the gold structures in the planned bulk samples areas and extend the deposit at depth and to the west. As we await the final results for Phase 2, we have commenced Phase 3 drilling, which in addition to definition drilling on planned stopes in the western sector of the deposit is focused on other promising exploration targets on the 151 km2 Croinor Gold property. From what we know of Croinor Gold to date, we believe that its gold discovery potential remains essentially untapped.”
Phase 2 drill results from the Croinor Gold project
| Hole Number | Length | From | To | Width* | Grade Au |
| (m) | (m) | (m) | (m) | (g/t) | |
| CR-18-592 | 208 | 180.5 | 181.2 | 0.7 | 1.66 |
| CR-18-596 | 91 | 56.5 | 58.0 | 1.5 | 9.87 |
| Including | 57.5 | 58.0 | 0.5 | 26.70 | |
| CR-18-598 | 328 | 277.0 | 277.7 | 0.7 | 0.64 |
| CR-18-599 | 111 | 56.6 | 57.7 | 1.1 | 7.78 |
| CR-18-600 | 82 | Abandoned hole | |||
| CR-18-601 | 436 | 339.3 | 340.4 | 1.1 | 5.30 |
| CR-18-602 | 81 | 51.3 | 52.1 | 0.8 | 0.02 |
| CR-18-603 | 342 | 151.8 | 152.8 | 1.0 | 1.40 |
| CR-18-604 | 202 | 179.6 | 180.0 | 0.4 | 0.03 |
| CR-18-605 | 97 | 57.0 | 58.0 | 1.0 | 4.09 |
| CR-18-606** | 637 | 333.5 | 342.5 | 9.0 | 8.24 |
| Including | 333.5 | 336.1 | 2.6 | 26.38 | |
| 346.7 | 347.3 | 0.6 | 3.95 | ||
| CR-18-607 | 292 | 175.0 | 177.4 | 2.4 | 2.00 |
| Including | 175.5 | 176.0 | 0.5 | 3.12 | |
| CR-18-608 | 193 | 132.2 | 133.2 | 1.0 | 0.41 |
| CR-18-609 | 208 | 112.3 | 113.2 | 0.9 | 0.13 |
| CR-18-610 | 250 | 177.0 | 178.0 | 1.0 | 7.30 |
| 180.0 | 181.0 | 1.0 | 5.36 | ||
| 189.0 | 196.0 | 7.0 | 5.67 | ||
| Including | 189.0 | 192.0 | 3.0 | 7.01 | |
| 199.0 | 199.8 | 0.8 | 7.58 | ||
| CR-18-611 | 223 | 188.0 | 189.0 | 1.0 | 29.50 |
| CR-18-612 | 300 | 99.8 | 100.8 | 1.0 | 35.90 |
| CR-18-613 | 142 | 74.5 | 75.5 | 1.0 | 0.66 |
| CR-18-614 | 55 | 38.7 | 39.3 | 0.6 | 0.16 |
| CR-18-615 | 181 | 38.85 | 40.9 | 2.05 | 9.66 |
| Including | 40.0 | 40.9 | 0.9 | 18.45 | |
| 93.5 | 94.5 | 1.0 | 2.35 | ||
| 112.0 | 113.0 | 1.0 | 7.67 | ||
| 175.0 | 176.35 | 1.35 | 3.41 | ||
| CR-18-616 | 181 | 60.4 | 61.6 | 1.2 | 6.34 |
| 66.2 | 67.4 | 1.2 | 4.68 | ||
| CR-18-617 | 130 | 36.8 | 37.6 | 0.8 | 0.46 |
| CR-18-618 | 199 | 73.3 | 74.0 | 0.7 | 4.54 |
| CR-18-619 | 151 | 28.0 | 29.2 | 1.2 | 12.00 |
| 32.8 | 34.8 | 2.0 | 6.60 | ||
| CR-18-620 | 70 | 39.0 | 41.2 | 2.2 | 6.72 |
| Including | 39.0 | 40.0 | 1.0 | 11.25 | |
| CR-18-621 | 85 | 66.5 | 67.6 | 1.1 | 12.50 |
| CR-18-622 | 52 | 42.0 | 43.0 | 1.0 | 3.07 |
| * | The width shown is the core length. True width is estimated to be 90-95% of the core length. |
| ** | Hole CR-18-586 was drilled down dip, parallel to the diorite, to test for the presence of multiple directions of quartz veining. The width shown is the core length. True width is estimated to be 30-35% of the core length. |
Sampling normally consists of sawing the core into two equal halves along its main axis and shipping one of the halves to the ALS Minerals laboratory in Val-d’Or for assaying. The samples are crushed, pulverized and assayed by fire assay with atomic absorption finish. Results exceeding 3.0 g/t are re-assayed using the gravity method, and samples containing gold grains are assayed using the metallic sieve method. Monarques uses a comprehensive QA/QC protocol, including the insertion of standards, blanks and duplicates.
The technical and scientific content of this press release has been reviewed and approved by Ronald G. Leber, P.Geo., the Corporation’s qualified person under National Instrument 43-101.
ABOUT MONARQUES GOLD CORPORATION
Monarques Gold Corporation …read more
From:: Investing News Network