Centenera Receives Additional Positive Drill Results from Drill Hole 18-ESP-025, Esperanza Copper-Gold Porphyry Project, San Juan Province, Argentina

Centenera Mining Corporation (TSXV:CT; OTC:CTMIF) has received final batch of drill results from drill hole 18-ESP-025 at the Esperanza Copper-Gold Porphyry project. Drill hole 18-ESP-025 collared in mineralization and continued to drill mineralized rock to end of hole (387m; hole abandoned due to drilling difficulties). Mineralization remains open at depth.

Laboratory results have been returned (Table 1) for the entire drill hole grading 0.57% copper and 0.27g/t gold; 0.78% copper equivalent1,2. This includes 232m from surface grading 0.74% copper and 0.33g/t gold; 1.00% copper equivalent1,2.

“In a global context, the complete results from drill hole 18-ESP-025 compare well with drill results from peer copper deposits reported in Q1 this year; the drill hole would have ranked number three only being exceeded by two deep copper deposits (Table 2),” stated Keith Henderson, Centenera’s President & CEO. “Looking at the comparison table it is important to remember that Centenera’s drill intersection is the only one starting from surface. Other factors such as location with respect to infrastructure also upgrade the Esperanza intersection relative to deposits in more remote locations.”

Table 1: Complete drill results for drill hole 18-ESP-025
Drillhole Azimuth Dip From (m) To (m) Interval (m) 1 Copper (%) Gold (g/t) Copper Equivalent (%)2
18-ESP-025 280 -67 0 387 387 0.57 0.27 0.78
including 0 368 368 0.59 0.28 0.81
including 0 232 232 0.74 0.33 1.00

Notes 1 True width is not known. 2 Copper equivalent = Copper grade % + (0.795 x gold grade g/t), where the conversion factor of 0.795 is calculated by comparing the value of copper $2.20/lb to the value of gold at $1,200/oz and assuming 100% recovery.

Table 2: Comparison between drill hole 18-ESP-025 and global top ten copper drill intersections published in Q1 2018.
Q1 2018 Ranking1 Company Project Copper (%) Drill Intersection (m) Copper (%) x (m) Thickness Depth to Top of Intersection Location
1 Nevsun Resources Timok 0.77 847 652 1354 Serbia
2 SolGold Cascabel 0.54 824 445 736 Ecuador
#3 Centenera Mining Esperanza 0.57 387 221 surface Argentina
4 Orion Minerals Prieska 2.39 81.6 195 152 South Africa
5 Orla Mining Cerro Quema 1.54 124.5 192 75 Panama
6 Xanadu Mines Kharmgtai 0.26 623.5 162 324 Mongolia
7 Sierra Metals Yauricocha 1.48 99 147 337 Peru
8 Venturex Resources Sulphur Springs 3.64 40 146 158 Australia
9 Surge Copper Ootsa 0.27 537 145 350 BC, Canada
10 Ero Copper MCSA Mining Complex 6.3 22.9 144 158 Brasil

Notes 1 Ranking is achieved by multiplying copper % by intersection meters. Note that the ranking is of projects where copper is the primary commodity and does not take account of other commodity credits. Esperanza has gold credits that are not included in the calculation. Note also that mineralization in drill hole 18-ESP-025 is the only intersection that begins from surface.

A photo accompanying this announcement is available at http://resource.globenewswire.com/Resource/Download/4b90de6d-e1d4-48ef-abbf-83b9b41c7db4

Figure 1: East-west cross section showing complete results from 18-ESP-025 and previous drill holes. The exploration vector to higher grade copper and gold is interpreted to be west, where two target drill holes are highlighted. Note that all drill holes on the section are open at depth and there is significant untested ground located to west and east.

A photo accompanying this announcement is available at http://resource.globenewswire.com/Resource/Download/8b821313-e6cf-4bed-b3c4-86a3add2ac33

Figure 2: Map showing all drill holes completed on the property. Drilling to the east is testing a gold-bearing system whereas drill holes to the west is testing a copper-gold porphyry system, which Centenera is focused on. Section line locations for Figures 1 and 3 are also shown as well as select drill hole traces for targets.

About Esperanza Copper-Gold Porphyry

The outcropping copper-gold porphyry mineralization at Esperanza was first drill-tested in 2006-2007 by 7 drill holes totalling 2,011 metres. All drill holes intersected significant copper-gold mineralization. Drilling highlights include:

  • Mineralization is outcropping at surface with a pyrite halo extending over a 1,400m x 850m area
  • Drill holes generally intersected mineralization at surface
  • Mineralization is open in all directions
  • Majority of drill holes terminated in mineralization and are open at depth
  • Several drill holes demonstrate increasing grade with depth

A photo accompanying this announcement is available at http://resource.globenewswire.com/Resource/Download/821ba196-b247-419d-81ba-70d3247a22ae

Figure 3: North-south cross section showing complete results from 18-ESP-025 and previous drill holes.

Quality Assurance / Quality Control

Drilling undertaken by Centenera in 2018 has been supervised by on site personnel at the project who rigorously collect and track samples, which are then sealed and shipped to SGS Minerals (“SGS”) for analysis. SGS’s quality system complies with the requirements for the International Standards ISO 9001:2000 and ISO 17025:1999. Analytical accuracy and precision are independently controlled by company using blanks, control reference material and duplicate samples.

Qualified Person

Keith J. Henderson, P.Geo., is the Company’s qualified person as defined by National Instrument 43-101 and has reviewed the scientific and technical information that forms the basis for portions of this news release. He has approved the disclosure herein. Mr. Henderson is not independent of the Company, as he is an employee, a shareholder and holds incentive stock options.

About Centenera Mining Corporation

Centenera is a mineral resource company trading on the TSX Venture Exchange under the symbol CT and on the OTCQB exchange under the symbol CTMIF. The Company is focused 100% on mineral resource assets in Argentina. The Company intends to focus its 2018 exploration activities on drill-testing its flagship Esperanza copper-gold project.

Other assets include the El Quemado lithium pegmatite project in Salta Province and the Organullo gold project. The Organullo project has approximately 8,000 metres of historical drilling and assay results. Organullo has a geological target range from 19.8 million tonnes grading at 0.94 g/t gold (600,000 ounces) to 31.6 million tonnes grading 0.92 g/t gold (940,000 ounces) using a 0.5 g/t gold cut-off-grade. It should be noted that these potential exploration target quantities and grades are conceptual in nature, that insufficient exploration and geological modelling has been done to define a mineral resource, and that it is uncertain if further exploration will result in the delineation of a mineral resource.

On Behalf of the Board of Directors of

CENTENERA MINING CORPORATION

“Keith Henderson”

President & CEO

For further details on the Company readers are referred to the Company’s web site (www.centeneramining.com) and its Canadian regulatory filings on SEDAR at www.sedar.com.

For further information, please contact:

Keith Henderson

Phone: 604-638-3456

E-mail: info@centeneramining.com

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies …read more

From:: Investing News Network